PET Resin
PET Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance
and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic.
The electrical insulation of PET is perfect and little
be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents.It is a condensate of terephthalic acid and ethylene glycol, together with PBT, referred to as thermoplastic polyester, or saturated polyester. PET Characteristic: is milky white or light yellow highly crystalline polymer, the surface smooth and shiny.
Features:
1. Good electrical insulation performance, less affected by temperature, but poor corona resistance.
2. Non-toxic, weather resistance, good stability against chemicals, low water absorption, resistant to weak acids and organic solvents, but not resistant to hot water soaking, not alkali resistant.
3. The glass transition temperature of PET resin is high, the crystallization speed is slow, the molding cycle is long, the molding cycle is long, the molding shrinkage rate is large, the dimensional stability is poor, the crystallized molding is brittle, and the heat resistance is low.
4. The heat distortion temperature and long-term use temperature are very high among thermoplastic general engineering plastics.
5. Because of the high heat resistance, the reinforced PET is immersed in a solder bath at 250°C for 10 seconds, and it hardly deforms and does not change color. It is especially suitable for the preparation of electronic and electrical parts for soldering.
Application:
1. PET is mainly used for fibers, and a small amount is used for films and engineering plastics.
2. Another use of PET is blow molding products, which are used in various bottles, such as water bottles, carbonated beverage bottles, and oil bottles.
Number |
Item |
Unit |
Typical Value |
Test Method |
1 |
Appearance |
- |
No color stain |
Visual inspection |
2 |
Intrinsic Viscosity |
dl/g |
0.64±0.015 |
GB/T17932-2013 |
3 |
Carboxyl Content |
mol/t |
30±4 |
4 |
color Value |
L |
- |
≥80 |
5 |
b |
- |
4±2 |
6 |
Irregular Granule |
wt% |
≤0.4 |
7 |
Weight/100pcs |
g/100 |
3±0.5 |
8 |
Water content |
wt% |
≤0.4 |
9 |
DEG content |
wt% |
1±0.2 |
10 |
Melting Temperature |
ºC |
260±2 |
11 |
Ash Content |
% |
≤0.06 |
12 |
Iron Content |
mg/kg |
≤2 |
13 |
Aggregate |
pc/mg |
≤1 |
14 |
Powders |
mg/kg |
≤100 |
1.Packing:
25kg/bag, or per your requirement.18mt-20mt /20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
![China Factory Supply 100% Virgin Bottle Grade Pet Resin](//www.micstatic.com/athena/img/transparent.png)
Hebei Sashang Technology Co., Ltd. Specializes in exporting high quality Research chemical, Basic chemical and plastic raw material etc.Our products are produced on the basis of good technical team, advanced equipment, high qualified management which meet the requirements of security and environmental protection.
Our main products are: HDPE,PVC,PP, POM, EVA, LDPE, PET, PC, GPPS and etc... We earned customer trust and created a good reputation during these years. We will provide the comprehensive products and service to you! Our products is exported to Southeast Asia, North America, Europe, Africa and other places all over the world with high quality products and competitive prices. We believe that our manufacturing capabilities and services can bring benefits to our valued customers. We believe that our products and services can bring benefits to our valued customers.
We look forward to establishing a long-term cooperative relationship with you!
![China Factory Supply 100% Virgin Bottle Grade Pet Resin](//www.micstatic.com/athena/img/transparent.png)
![China Factory Supply 100% Virgin Bottle Grade Pet Resin](//www.micstatic.com/athena/img/transparent.png)
![China Factory Supply 100% Virgin Bottle Grade Pet Resin](//www.micstatic.com/athena/img/transparent.png)
FAQ
1. Are you trading company or Manufacturer ?
We are manufacturer.
2.What can you buy from us?
PP,HDPE,LDPE,LLDPE,PVC,PLA,PCTG,ABS,EAA,POM,EVA,POE,PPSU,EMAA,PA66,PC,PC/ABS,PE,POP,etc
3.Can we get your samples?
Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
4.Are you able to deliver on time?
Of course!we specialised in this line for many years,many customer make a deal with me because we can deliver the goods on time and keep the goods top quality!
5.What are your payment terms ?
We usually accept T/T,L/C for payment.
6.Do you accept customization?
Yes,the specification,packaging and logo can be customized.